Driveway costs for Hereford homes
Driveway cost calculator for Hereford
What should a new drive cost? Pick one of the eleven jobs below to see the usual UK price and the range.
No typing and no sign-up. If you then want a price for your own drive, the short form sits right under the result.
Look up a typical driveway price
Pick whichever job is closest to yours. Some jobs are priced per square metre, and the job name says so.
Every figure here is a guide price taken from a published cost guide. None is an offer of work. Your own price will turn on the size of the drive, the ground, your choice of materials and what the installer finds when the old surface comes up.
Every figure in one list
| Job | UK guide price |
|---|---|
| Block paving, 50 square metre driveA 50 square metre drive in block paving, materials and labour. The guide gives about £5,500 as the average. | £4,500 to £6,500typical about £5,500 |
| Tarmac drive, price per square metreThe guide gives £50 to £90 for each square metre of tarmac. This is a price per square metre, not for a whole drive. | £50 to £90 |
| Resin bound drive, price per square metreThe guide gives £90 to £130 for each square metre of resin bound surface. This is a price per square metre, not for a whole drive. | £90 to £130 |
| Gravel driveA standard residential gravel drive, materials and labour. | £1,000 to £3,500 |
| Concrete drive, 60 square metre two-car sizeA two-car concrete drive of about 60 square metres, fully installed. | £4,000 to £7,500 |
| Imprinted concrete, price per square metreThe guide gives £75 to £90 for each square metre, with about £80 as the usual figure. This is a price per square metre, not for a whole drive. | £75 to £90typical about £80 |
| Natural stone paving, price per square metreThe guide gives £100 to £150 or more for each square metre of natural stone paving. This is a price per square metre, not for a whole drive. | £100 to £150 |
| Channel drain installed on a driveInstalling a grated channel drain. The cost depends on the length and quality of the channel. | £300 to £2,500 |
| Soakaway installedInstalling a buried soakaway that lets surface water seep into the ground. It suits ground that takes water. | £750 to £2,500 |
| Driveway cleaningCleaning a driveway, with the price depending on its size and condition. The guide gives about £350 for a medium drive. | £250 to £400typical about £350 |
| Driveway sealing, price per square metreSealing a cleaned driveway. This is a price per square metre, not for a whole drive. | £5 to £17 |
Every figure here is a guide price taken from a published cost guide. None is an offer of work. Your own price will turn on the size of the drive, the ground, your choice of materials and what the installer finds when the old surface comes up.
Why a real quote can differ from the guide
A guide price is an average across many drives in many places. Yours is one drive at one address. Four things move the figure.
How big it is
Size is the biggest factor. The block paving cost guide says that replacing a whole front lawn, around 80 square metres, comes out nearer £10,000 to £12,000 than the 50 square metre price.
What is there now
Taking out an old concrete slab, or digging deep because the ground is soft, adds time and the cost of taking the spoil away. Soils across Herefordshire are mostly clay, which can mean more digging and more thought about drainage.
The surface you choose
The paving cost guide puts gravel at £30 to £60 per square metre and natural stone at £100 to £150 or more. Resin and block paving sit between them. Our guide to the best type of driveway helps you choose.
Extra costs
Drains, edging, a dropped kerb and its council fees, and a retaining wall on a slope are usually separate from the surface price. Check what a quote includes.
Reading the numbers
Most jobs show a low and a high figure. If the guide also names an average that sits between them, you see that as well. If a guide gives a single figure for a size, you see that one figure. Nothing has been filled in by guesswork.
A few jobs are priced per square metre, and the job name says so. To work out a total you would need to measure your drive, and the installer will do that for you when they visit.
Common questions
How much does a driveway roughly cost?
For a typical two-car drive of 40 to 50 square metres, the paving cost guide gives £2,500 to £6,500 fully installed, depending on the material. The calculator above shows the figure for each material from the guides we use.
Why are some prices given per square metre?
Some guides give a rate for each square metre instead of a total, which is useful when you know the size of your drive. We show those with the unit in the job name so they are not mixed up with whole-drive prices.