Driveway advice for Hereford homes
The cheapest driveway options: gravel, tarmac or something else?
Everyone asks the same first question: what is the cheapest way to get a decent drive? The answer is easy to find in the cost guides. It is less simple to say what will cost you least over ten years.
Here is how the main surfaces compare, using the published guides, and what each one costs to look after.
The surfaces in order of price
The driveway paving cost guide gives a price per square metre for each material. From the least costly up, it reads like this.
- Gravel: £30 to £60.
- Tarmac: £50 to £90.
- Concrete: £70 to £110.
- Block paving: £80 to £130.
- Resin bound: £90 to £130.
- Natural stone: £100 to £150 or more.
The tarmac cost guide has a similar order. It lists gravel at about £60 per square metre, tarmac at £90, concrete at £95, block paving at £100 and resin bound at £120.
Gravel: cheapest to lay
Gravel comes out cheapest in both guides. One of them puts a standard residential gravel drive at £1,000 to £3,500 in total. The catch is upkeep. The guide says a gravel drive generally needs topping up every one to two years, and puts the yearly cost at £50 to £150. See gravel driveways.
Tarmac: the cheapest hard surface
If you want a firm surface that stays put, tarmac is usually the least costly. One cost guide gives about £4,500 for a 50 square metre drive. It needs little upkeep, though cracks and holes need attention. See tarmac driveways.
Block paving and resin cost more
Both are priced higher because the materials and the labour cost more. In return you get a neat finish. A block drive can also be mended a piece at a time. Resin gives a smooth surface with no loose stones. Compare them on the pages for block paving and resin.
What the cheapest surface can cost you later
A low price to lay is only part of the bill. The gravel cost guide says that replenishing a gravel drive costs £40 to £70 per tonne, and that an average drive takes three to five tonnes each time. Tarmac and block paving cost more to put down but ask for less of your time and money afterwards, apart from cleaning and the odd repair.
Add up what you expect to spend over the next ten years, not just the price on the quote. If you will not rake and top up a gravel drive, it is not the cheap option for you.
Ways to trim the bill
Choosing the surface is not the only lever.
- Keep the drive no bigger than it has to be. Two cars need less than four.
- Lay a simple pattern. Herringbone costs more in labour than plain rows.
- Leave a strip of lawn between two wheel tracks, if you do not need a full-width surface.
- Ask for a price with and without extras such as borders and drains, and choose which ones to keep.
- Do the preparation you can safely do, such as clearing the area and moving plants.
Do not cut the base. A thin base is the main reason drives sink, and it costs far more to put right than it saved.
Common questions
What is the most budget-friendly option for a driveway?
Gravel costs least to lay in both sets of guides. Tarmac is the cheapest hard surface. Which one costs less over time depends on how much upkeep you are willing to do.
How much does a 40 square metre driveway cost?
The cost guide covers double drives of 40 to 50 square metres, and gives £2,500 to £6,500 fully installed depending on the material. It does not give a separate price for 40 alone. Ask for a quote based on your own measurements.
Get a price for your own drive
Guide prices only go so far. The ground, the size and the access change the real figure, and the only way to know is to ask.
Describe the drive and say which part of Hereford you live in. Asking is free.