Driveway installers in Hereford, Herefordshire

Block paving driveways in Hereford: a free quote, then a call back at the time you choose

Block paving means small blocks fitted together over a compacted base, usually in a pattern. Tell us the size of your drive and what you have now in the short form, then pick a time for the call back. At the time you chose, a local driveway installer calls with a free quote. You pay nothing to ask.

Get a free driveway quote

A minute to fill in. No email needed.

By sending this form you agree to your details being shared with a local driveway installer so they can contact you. See our privacy notice.

  • A drive that looks smart from the road
  • Single blocks can be lifted if a pipe needs mending
  • Choose the colour, the pattern and the edging
  • A free quote, and you can still say no

A front garden that is not earning its keep

The lawn is worn into two muddy tracks where the car goes. The edge of the old concrete has crumbled away. You have a spare weekend and a rough idea of what you want, but no idea what the base should be, which blocks to choose or how much of it you can do yourself.

Block paving is a popular answer, and it is easy to get wrong. The blocks look the same on the day. What matters is what lies underneath them.

Put your area and the size of the drive in the short form. A local driveway installer will ring you back at the time you pick and give you a free quote.

Herringbone block paving on a driveway with a drainage channel across it and an edge course beside the lawn

From your form to a price in three steps

  1. Describe the drive

    Add your name, number and area, then say what you want in your own words. A new surface, a bigger drive, a drain for the puddle by the door: all fine. Rough measurements help if you have them.

  2. Answer a call at the time you chose

    A driveway installer who covers your part of Hereford rings when it suits you. They ask a few questions and usually arrange to visit and measure up.

  3. Look at the price, then decide

    You get a free quote for the work. Ask for it in writing and take your time. You can compare it with another one and you can say no.

What block paving is

Block paving, sometimes called brick paving, is made of small concrete or clay blocks. They are fitted tightly together on a bed of sharp sand over a base of compacted crushed stone. Edging holds them in at the sides. Fine sand is swept into the gaps at the end, which locks the blocks together.

Because each block is separate, the drive can take a car's weight and move very slightly without cracking. That is why block paving is so common in front gardens.

Patterns, colours and borders

Most of the look comes from three choices.

The pattern

Herringbone is the usual one for a drive. The blocks lock together in a zigzag, which stands up well to cars turning and braking. Stretcher bond, laid in straight lines like a brick wall, looks plainer and is better for paths.

The colour

Charcoal and grey blends are the safest. They hide tyre marks and oil drips better than a pale block. Brindle mixes of brown and grey suit red brick houses, and there are plenty of red brick houses in Hereford.

The border

A line of blocks in a contrasting colour around the edge gives a neat frame. It also gives the installer a straight line to work to.

What goes on under the blocks

A block drive that sinks has almost always been laid on too little base. Here is what a sound one has.

  • A dug-out area deep enough for the base, bedding sand and blocks to sit level with the surroundings.
  • A compacted crushed stone sub-base, laid and rolled in layers.
  • A thin bed of sharp sand, screeded flat.
  • Firm edging that stops the blocks spreading at the sides.
  • A gentle fall so that rain runs away from the house.

Soils in Herefordshire are mostly clay, so the water has to be taken care of on the surface and in the base. Ask the installer how they plan to do it. See driveway drainage for the options.

Typical block paving prices

These are typical UK guide prices from two published cost guides. They use different units, so read the job name on each row.

JobUK guide price
Block paving, 50 square metre drive£4,500 to £6,500typical about £5,500
Block paving, price per square metre£80 to £130

Guide prices, not quotes. The figure for your drive depends on its size, shape and state, and on the blocks you pick.

The cost guide adds that an 80 square metre area, big enough to replace a whole front lawn, comes out nearer £10,000 to £12,000. A bigger area or a complicated shape adds to the price.

Looking after a block drive

Block paving is low effort but not no effort. Weeds can seed in the joints, and moss grows where it stays damp. A stiff brush and a yearly sweep of fresh jointing sand keeps the blocks locked in. If it goes green, cleaning and sealing will freshen it up.

If you want to cross the pavement to reach the drive, you will also need a dropped kerb, and permission before work starts.

Driveway work in Hereford

Where in and around Hereford

Driveway help for homes across the city and in these places nearby.

  • City centre, Widemarsh and Victoria Park
  • Aylestone Hill, Bartonsham and Greyfriars
  • Tupsley
  • Hinton, Hunderton and Newton Farm
  • Belmont
  • Bobblestock, Kings Acre and Redhill
  • Whitecross, Broomy Hill and Eign Hill
  • Holmer
  • Rotherwas
  • Credenhill
  • Stretton Sugwas
  • Withington
  • Lugwardine and Bartestree
  • Clehonger and Kingstone
  • Hampton Bishop

See every area covered around Hereford

No cost to ask, and no commitment

  • Free to send. The form costs nothing and nobody can hold you to a price. You can walk away at any point.
  • Four boxes, no more. Name, phone number, area and the job. You do not have to give an email address or the number of your house.
  • Prices come from published guides. Every figure on this site is a typical UK guide price from a published cost guide. They help you judge a quote and are no substitute for one.
  • Used for your drive only. Your details are used to arrange your driveway work and for nothing else. They are never sold.

Common questions

What is the average cost of paving a driveway in the UK?

The cost guide says paving a driveway costs around £50 to £130 per square metre, depending on the material. For a standard double drive of 40 to 50 square metres, it puts the total at £2,500 to £6,500 fully installed. Block paving sits in the upper half of that range. The figure for your own drive depends on its size and the ground.

What type of paving is best for a driveway?

For most family drives, concrete block paving laid in herringbone is a safe choice. It is made for traffic and it lasts if the base is right. Natural stone looks lovely but costs more. Large flat slabs suit paths and patios better than a drive, where a car's weight can crack them.

Ask for your free block paving quote

A sinking or loose block drive gets harder to put right the longer it is left. Water gets in, sand washes out and blocks start to move. Installers are also often booked some weeks ahead.

You can say no at any point. Describe the drive and say which part of Hereford you live in.

Get a free driveway quote

A minute to fill in. No email needed.

By sending this form you agree to your details being shared with a local driveway installer so they can contact you. See our privacy notice.

Get a free quote