Driveway advice for Hereford homes

The best type of driveway: how to choose between the five main surfaces

No surface is best for every house. The right one depends on your budget, your front garden and how much looking after you are happy to do.

Here are the five main choices, with what each is good at and where it falls short.

Block paving

Good looking, and strong when it is laid on a proper base. Single blocks can be lifted for repairs. It costs more than tarmac or gravel, and it needs sweeping and a refill of jointing sand now and then. Weeds can come up in the joints. See block paving driveways.

Tarmac

Firm, plain and quick to lay, and usually the cheapest hard surface. It has no joints for weeds. It is less pretty than paving and can crack at the edges if nothing holds it in. See tarmac driveways.

Resin bound

A smooth, neat surface with no loose stones, and it can let water through when it is laid properly. It costs more and it needs a sound base. See resin driveways.

Gravel

The cheapest to lay, and rain goes straight through it. It needs topping up, edging and raking, and it is hard for bins and pushchairs. See gravel driveways.

Concrete

Very tough and good under heavy vehicles. Plain concrete can look dull, and imprinted concrete can fade. It does not let rain through. See concrete driveways.

What Hereford ground does to the choice

Soils across Herefordshire are mostly clay. Clay holds water and drains slowly, so after a wet spell a drive built on it has to cope with water sitting in the ground as well as falling on the top. That favours a deep, well-compacted base under any surface, and a clear route for the water to leave.

A surface that lets rain pass through still needs somewhere for the water to go below it. On clay, a stone layer under the surface can hold the water while it drains away slowly. Ask the installer how they will deal with it, and read our page on driveway drainage.

If your home is near the River Wye, think about levels too. The river reached its highest recorded level in Hereford in February 2020, at 6.11 metres, and many homes were evacuated.

Looks, colour and the house

The surface will be the largest thing people see from the road, so it should suit the house. Red brick looks good with grey and brown block paving, or with stone-coloured resin. A render or pale brick house can take charcoal. Gravel looks best on a larger plot, where there is room for it to look natural. A small front garden with a tiny strip of gravel can look untidy.

Ask to see a sample next to your own brickwork, in daylight, before you decide. A picture on a screen is a poor guide to colour.

Matching the surface to the house

Think about which of these describes you.

  • You want the smartest look from the road: block paving or resin bound.
  • You want the most drive for the least money: tarmac or gravel.
  • You have heavy vehicles: concrete or tarmac, laid thick.
  • You want to meet the front garden rule without extra drains: gravel, resin bound or permeable block paving.
  • You want low upkeep: tarmac or resin bound.

Whatever you choose, the base matters more than the top. Ask every installer what base they will lay. Our guide to choosing a driveway installer has the questions.

Common questions

What is the best type of driveway to have in the UK?

There is no single best. Block paving and resin bound give the smartest finish, tarmac gives the most drive for the money, gravel is the cheapest, and concrete is the toughest. Which suits you depends on your budget and how much upkeep you will do.

Talk through your options with a local installer

Surfaces are priced differently, and the right answer for your drive depends on the size, the ground and your budget. A free quote makes it concrete.

Describe the drive and say which part of Hereford you live in. Asking costs nothing.

Get a free driveway quote

A minute to fill in. No email needed.

By sending this form you agree to your details being shared with a local driveway installer so they can contact you. See our privacy notice.

Get a free quote