Driveway advice for Hereford homes

Building a driveway yourself: what is realistic and what is not

Some people are tempted to lay a drive themselves. It is possible, and some jobs suit it. Others do not, and a mistake is expensive because it is buried.

Here is where the line falls for each type of surface.

The jobs most people can manage

Gravel and block paving are the two a capable DIYer can take on, if they have time, a helper and the right kit.

  • Gravel: dig out, lay and compact a base, add a membrane and edging, and spread the stone.
  • Block paving: the same, plus bedding sand, laying blocks to a pattern, cutting them, and sweeping in sand.
  • Cleaning: hiring a pressure washer is within most people's reach.

Even these are heavy. A single car drive needs tonnes of stone and sand, and a plate compactor weighs as much as a person. You will probably have to hire the compactor.

The jobs best left to a professional

Tarmac and resin both depend on skill and equipment you cannot easily hire. Tarmac has to be laid hot and rolled before it cools. Resin has to be mixed and trowelled in the right weather. Mistakes show straight away and cannot be undone.

Poured concrete is hard to get right on a large area, and a slab that cracks in the wrong place is hard to hide.

What is easy to get wrong

Whoever lays it, three things decide whether a drive lasts.

The base

A base that is too thin or not compacted properly is the main reason drives sink. Soils across Herefordshire are mostly clay, which holds water, so the base is even more important.

The levels and the drainage

Water must run away from the house. Getting falls right across a whole drive is a skill. See driveway drainage.

The rules

The front garden rule applies to you as much as to a professional. See the rules for driveways.

What doing it yourself really saves

The driveway paving cost guide says that labour typically adds £30 to £60 per square metre on top of the cost of materials. That is the part you save when you do the work yourself. The block paving cost guide gives an average labour rate of £250 per day.

Set that against what you spend on hiring equipment, buying the stone and sand, paying to have the old surface and soil taken away, and the weekends you give up. For a small drive it may add up. For a big one it often does not.

The pavement is not a DIY job

If you need a dropped kerb, you cannot do the kerb work yourself. Herefordshire Council says the contractor must have £5 million third-party liability insurance and the relevant street works qualifications. You can still lay the drive behind the kerb yourself, but the crossing has to be built by a qualified contractor. See dropped kerbs in Hereford.

Common questions

Can I build a driveway myself?

Yes, for some surfaces. Gravel and block paving are the usual choices for a capable DIYer. Tarmac and resin need professional skill and equipment. Any work on the pavement, such as a dropped kerb, must be done by a qualified contractor. Whatever you choose, you still have to follow the front garden rule.

Compare a quote with the cost of doing it yourself

The cost of hiring a plate compactor, taking away spoil and buying stone adds up, and a mistake costs more than the quote would have. A free quote shows you what the difference really is.

Describe the drive and say which part of Hereford you live in. Asking is free.

Get a free driveway quote

A minute to fill in. No email needed.

By sending this form you agree to your details being shared with a local driveway installer so they can contact you. See our privacy notice.

Get a free quote